So back a few years ago since before I moved over working on the ESP family, I was an Atmel junkie. One of the thing’s that came in real handy was working with Software UART and the ATTiny84. It was a real great learning experience and I got really really burned with the DIV8 fuse …
Monthly Archives: February 2018
Traffic Court CVC 22350 Basic Speed Law – Continued Appellant's Opening Brief
Prepost: Trial http://controllingtheinter.net/2018/02/12/cvc22350-traffic-trial-unsafe-speed/ Update: Appellee’s Opening Brief Response http://controllingtheinter.net/2018/03/07/appellees-opening-brief-response-from-district-attorneys-office/ Well the big day just passed for my opening brief. I sat on this for about a good three months contemplating on the format and doing research on the best way to tackle this issue. The problem with legal docs is that they’re not very abundant …
Continue reading “Traffic Court CVC 22350 Basic Speed Law – Continued Appellant's Opening Brief”
Quieting down the Cisco SG200 POE Switch
So this weekend someone asked me about an issue they had with the Cisco POE switch being very noisy. He sent me this link he found where a SysAdmin went and found replacement fan’s for his switch to quiet them down. http://wahlnetwork.com/2014/12/21/diy-project-replacing-stock-cisco-sg300-52-fans-silence/ The fan’s currently in the switch are: https://www.digikey.com/product-detail/en/delta-electronics/EFB0412MD-R00/603-1581-ND/2560704 He suggested if this fan …
Fusion 3d Relay Case and Hayward Hacked Smart Pool Pump
So for this project and try to convert a Hayward pool pump variable speed into a smart pool pump. My ultimate goal to be able to control his heater through my cell phone so one the way I can set the pool pump to turn on which would then in turn start heating the pool with a …
Continue reading “Fusion 3d Relay Case and Hayward Hacked Smart Pool Pump”
Using PWM with the ATtiny84
So, A couple of days ago I posted in regards to Debouncing hardware button press using the Atmel family. The reason why I needed to do this was because I was planning to send a pulse width modulation signal to an H-bridge controller. Now in your Int Main you need to initialize the parameters of your …